New Pro Fox Trap, made in England, NEW Professional fox trap by The Trap Man.

Our New pro fox traps have been designed with a free-fall drop door which effectively lengthens the already long fox trap by not operating the door inside the trap, other manufacturers fox traps hang their doors from the inside of the cage thus lessening the cage size by almost the height of their fox trap. i.e. a 48" x 18"x 18" fox trap ONLY has a useable catching length of 32", this becomes even less the taller the cage. We at The Trap Man have designed and built HERE in the UK what we think is one of the most effective but simple to use fox traps available.

Dimensions of our Professional fox cage trap are a FULL 5ft long x 20" tall x 18" wide.(not including the slide assembly which is 38" tall)

It is made from 4mm diameter welded wire which has 2" holes, the door slide assembly is fabricated from heavy duty steel and the trap is electro galvanized after manufacture to prevent it rusting.

Simple free-fall door released via a wire bait hook.

NEW Professional fox trap by The Trap Man is supplied folded for ease of delivery, assembly should only take minutes, its only a matter of unpacking the trap, unfolding the cage, lifting up the rear frame and attaching the tabs to the rear panel then offer up the slide assembly to the front of the fox trap and attach the tabs (using pliers) to the fox cage.

Bait using a 3" piece of kipper or oily fish tied to the bait hook, drop this through the top of the cage 6" from the end.

Set the door by pressing your booted foot against the door base and lifting the door up, once a the full height pull the setting bar forward so that the door rests upon it. Up and catching in less than 15 minutes.

The Trap Man offer FREE email support for as long as you own the new pro fox trap

Now the bad news........the cost!

Try TrapMan.co.uk/store